How to choose hotel furniture from a professional hotel furniture factory?

　　The hotel furniture from different professional hotel furniture factories has different surface materials.For example,the legs of tables,chairs,and cabinets require the use of hard miscellaneous wood,which is relatively sturdy and can withstand loads,while the internal materials can use other materials;The thickness requirement for the legs of the coat is 2.5cm.If it is too thick,it will appear clumsy,thin,and prone to bending and deformation;Cabinets in kitchens and bathrooms should not be made of fiberboard,but should be made of plywood,as fiberboard can expand and damage when exposed to water;The dining table should be washable.

　　If insect eyes and foam are found in the wood,it indicates that the drying is incomplete.After inspecting the surface,it is recommended to open the cabinet and drawer doors to check if the internal materials have decayed.You can pinch it with your nails.If you squeeze it in,it means the material inside has rotted.After opening the cabinet door,smell it with your nose.If you wash your nose,stare,or shed tears,it means that the formaldehyde content in the adhesive is too high and harmful to the human body.

　　1.Moisture content

　　The moisture content of professional hotel furniture factory hotel furniture shall not exceed 12%.If the moisture content is high,the wood is prone to bending and deformation.Ordinary consumers do not have testing equipment when purchasing.They can touch the bottom of hotel furniture or areas without paint.If they feel damp with a moisture content of at least 50%,they cannot be used at all.Someone suggested that you can sprinkle some water on areas without paint.If the bleeding is slow or not slow,it indicates a high water content.

　　2.Furniture Structure

　　Small hotel furniture such as chairs,stools,and hangers can be dragged onto the concrete floor and gently dropped.Clear and crisp sound indicates good quality;If the voice is hoarse and there is splitting noise,it indicates that the tenon joint is not tightly connected and the structure is not firm.Tables can be shaken by hand to see if they are stable.You can sit on the sofa.If you move,it will squeak.This is nail art work,it won't take long.

　　Square tables,long tables,chairs,and other legs should have four triangular clips to secure them.When making a choice,you can turn the table and chair upside down to take a look,and the cloth covered chair can be touched by hand.

　　3.Four corner leveling

　　This flashed across the ground.Some hotel furniture only has three legs.Check if the desktop is straight,you cannot bend over or lower your waist.The desktop is convex,and the glass panel rotates when placed;The desktop is concave,and the glass panel will break when pressed down.Pay attention to checking the cabinet door.The gap in the drawer should not be too large.Pay attention to being level and straight,and the door should not sag.

　　4.Single board joint

　　Whether pasting wood veneer,PVC or pre coated paper,attention should be paid to whether the leather pasting is smooth,whether there are bulges,bubbles and loose splicing.

　　When checking,you should look at the light.You can't see it without looking at the light.The hotel furniture with willow wood veneer in Shuiqu is relatively damaged and can only be used for two years.For wooden veneers,edge planing veneers are superior to rotary cutting veneers.The method of identifying the two is to observe the pattern of the wood.The grain of the sliced veneer is straight and dense,while the grain of the rotary cut veneer is curved and sparse.For hotel furniture with particleboard veneer,the floor area needs to be sealed.If the edges are not sealed,the circuit board will absorb moisture,expand,and be damaged.Generally speaking,the edges and corners of veneer hotel furniture from professional hotel furniture factories are prone to tilting upwards.